# Automotive Service Bay Epoxy Flooring & Auto Bay Coatings in The Glebe, ON | Oil-Resistant Service Floor Specialists

> Automotive Service Bay Epoxy Flooring in The Glebe, ON. Broadcast quartz and polyaspartic epoxy systems built for dealership service departments, quick-lub

URL: https://ottawaepoxyflooring.ca/automotive-service-epoxy/glebe/

THE GLEBE · CITY OF OTTAWA

# Automotive Service Bay Epoxy Flooring & Auto Bay Coatings in The Glebe, ON

Glebe garage slabs are among the oldest we work on. A proper 100 percent solids build over a stabilized substrate is the only way to get a coating that lasts.

Call (613) 231 8659

[tel:+16132318659 →](tel:+16132318659)

 

Request a Quote

[/contact/ →](/contact/)

✓ Licensed and insured ✓ NCR-wide service ✓ Written quote in 24 hours

The Glebe is defined by early-1900s brick semis, century-home detached properties, and detached rear-lot garages of the same era. Automotive Service Bay Epoxy Flooring in The Glebe is what we do every week, and the substrate variation across this area is what makes the diagnostic-first approach non-negotiable.

## Automotive Service Bay Epoxy Flooring in The Glebe: local know-how

Glebe garages are often detached rear-yard structures on 1910s to 1930s slabs that need real substrate stabilization before any topcoat. In practice that means our The Glebe work starts with an ASTM F2170 moisture test and a mechanical grind to CSP 3, then a 100 percent solids base tied to a polyaspartic topcoat. Utility coordination when needed is with Hydro Ottawa.

## What is included

-   Alkaline degreaser and hot-water extraction verified by grind-dust colour
-   Diamond-ground CSP 3 profile suited to petroleum-contaminated slabs
-   Reinforced lift-pad zones rated to 12,000 lb concentrated loads
-   Quartz aggregate broadcast over 100% solid epoxy for wet traction
-   Resistance to ATF, gear oil, DOT 3 and DOT 4 brake fluid
-   UV-stable polyaspartic finish that resists hot-tire pickup
-   WSIB-certified, $2M liability on every project

## Published pricing for automotive service bay epoxy flooring in The Glebe

Written quote within 24 hours after slab assessment. Local rate published for transparency, most Ottawa contractors do not disclose.

| System | Price Range (CAD) | Notes |
| --- | --- | --- |
| Automotive Service Bay Epoxy Flooring | $6 to $12 per sq ft | Oil decontamination depth and hoist lift pad count affect final price. |
| Auto Bay Coatings upgrade | Add 15 to 25 percent | Faster cure, longer lifespan, or upgraded finish depending on scope. |
| Emergency / same-day | Quoted on site | Available across the NCR when the scope allows. |

Source: Ottawa Epoxy Flooring published rate card, 2026.

## Serving every part of The Glebe

We cover Central Glebe, Glebe Annex, Dow's Lake, Old Ottawa South (adjacent), Ottawa East, and the rest of The Glebe. Same pricing across the NCR, no travel surcharge.

## Other epoxy services in The Glebe

-   Basement Epoxy Flooring in The Glebe
    
    [/basement-epoxy-flooring/glebe/ →](/basement-epoxy-flooring/glebe/)
    
-   Commercial Epoxy Flooring in The Glebe
    
    [/commercial-epoxy-flooring/glebe/ →](/commercial-epoxy-flooring/glebe/)
    
-   Commercial & Industrial Epoxy Flooring in The Glebe
    
    [/commercial-industrial-epoxy/glebe/ →](/commercial-industrial-epoxy/glebe/)
    
-   Commercial Kitchen Epoxy Flooring in The Glebe
    
    [/commercial-kitchen-epoxy/glebe/ →](/commercial-kitchen-epoxy/glebe/)
    
-   Concrete Polishing in The Glebe
    
    [/concrete-polishing/glebe/ →](/concrete-polishing/glebe/)
    
-   Concrete Repair & Restoration in The Glebe
    
    [/concrete-repair/glebe/ →](/concrete-repair/glebe/)
    

## Frequently asked questions

How much does automotive service bay epoxy flooring cost in The Glebe?

Automotive Service Bay Epoxy Flooring in The Glebe typically runs $6 to $12 per sq ft. Written quote within 24 hours after we assess your slab and confirm the system spec.

Do you service every part of The Glebe?

Yes. We cover Central Glebe, Glebe Annex, Dow's Lake, Old Ottawa South (adjacent), and the rest of The Glebe. Same pricing across the NCR, no travel surcharge.

What makes automotive service bay epoxy flooring different in The Glebe?

Glebe garages are often detached rear-yard structures on 1910s to 1930s slabs that need real substrate stabilization before any topcoat. That is why every The Glebe job starts with a diagnostic on the slab before we spec the system.

How long does automotive service bay epoxy flooring take in The Glebe?

Most residential The Glebe projects finish in one to two days depending on square footage and prep. Commercial jobs are scheduled around your operating hours or after-hours if needed.

## Need automotive service bay epoxy flooring in The Glebe?

Call or request a written quote. We respond within 24 hours.

(613) 231 8659

[tel:+16132318659 →](tel:+16132318659)

 

Request Quote

[/contact/ →](/contact/)