# Commercial Kitchen Epoxy Flooring & CFIA-Compliant Coatings in Kanata, ON | Seamless Coved Kitchen Floor Pros

> Commercial Kitchen Epoxy Flooring in Kanata, ON. For NCR restaurants and food-service operators, we build CFIA-compliant seamless epoxy floors with 4 to 6

URL: https://ottawaepoxyflooring.ca/commercial-kitchen-epoxy/kanata/

KANATA · CITY OF OTTAWA

# Commercial Kitchen Epoxy Flooring & CFIA-Compliant Coatings in Kanata, ON

Kanata garages face the same freeze-thaw hit as the rest of the NCR, but the newer slabs mean moisture testing is often the deciding factor between a five-year and a fifteen-year system.

Call (613) 231 8659

[tel:+16132318659 →](tel:+16132318659)

 

Request a Quote

[/contact/ →](/contact/)

✓ Licensed and insured ✓ NCR-wide service ✓ Written quote in 24 hours

Kanata is dominated by 2000s-and-later detached homes with attached two-car garages, alongside the Kanata North tech-corridor commercial parks. Commercial Kitchen Epoxy Flooring in Kanata is what we do every week, and the substrate variation across this area is what makes the diagnostic-first approach non-negotiable.

## Commercial Kitchen Epoxy Flooring in Kanata: local know-how

Newer-build slabs across Kanata Lakes and Bridlewood are often under five years old. The concrete has barely finished curing, which changes how epoxy bonds and demands proper moisture verification before any base coat. In practice that means our Kanata work starts with an ASTM F2170 moisture test and a mechanical grind to CSP 3, then a 100 percent solids base tied to a polyaspartic topcoat. Utility coordination when needed is with Hydro Ottawa.

## What is included

-   Food-contact rated resin with zero VOC off-gas after cure
-   Trowel-shaped integral cove where every wall meets the slab
-   Broadcast quartz texture for wet-service R11 slip grading
-   Full CFIA and Ottawa Public Health inspection paperwork on delivery
-   Watertight cove-in detailing at trench and point drains
-   Overnight and between-service scheduling around your dining hours

## Published pricing for commercial kitchen epoxy flooring in Kanata

Written quote within 24 hours after slab assessment. Local rate published for transparency, most Ottawa contractors do not disclose.

| System | Price Range (CAD) | Notes |
| --- | --- | --- |
| Commercial Kitchen Epoxy Flooring | $5 to $11 per sq ft installed | Pricing depends on coving lineal footage, drain detailing, and chemistry. |
| CFIA-Compliant Coatings upgrade | Add 15 to 25 percent | Faster cure, longer lifespan, or upgraded finish depending on scope. |
| Emergency / same-day | Quoted on site | Available across the NCR when the scope allows. |

Source: Ottawa Epoxy Flooring published rate card, 2026.

## Serving every part of Kanata

We cover Kanata Lakes, Beaverbrook, Bridlewood, Morgan's Grant, Katimavik, Glen Cairn, and the rest of Kanata. Same pricing across the NCR, no travel surcharge.

## Other epoxy services in Kanata

-   Automotive Service Bay Epoxy Flooring in Kanata
    
    [/automotive-service-epoxy/kanata/ →](/automotive-service-epoxy/kanata/)
    
-   Basement Epoxy Flooring in Kanata
    
    [/basement-epoxy-flooring/kanata/ →](/basement-epoxy-flooring/kanata/)
    
-   Commercial Epoxy Flooring in Kanata
    
    [/commercial-epoxy-flooring/kanata/ →](/commercial-epoxy-flooring/kanata/)
    
-   Commercial & Industrial Epoxy Flooring in Kanata
    
    [/commercial-industrial-epoxy/kanata/ →](/commercial-industrial-epoxy/kanata/)
    
-   Concrete Polishing in Kanata
    
    [/concrete-polishing/kanata/ →](/concrete-polishing/kanata/)
    
-   Concrete Repair & Restoration in Kanata
    
    [/concrete-repair/kanata/ →](/concrete-repair/kanata/)
    

## Frequently asked questions

How much does commercial kitchen epoxy flooring cost in Kanata?

Commercial Kitchen Epoxy Flooring in Kanata typically runs $5 to $11 per sq ft installed. Written quote within 24 hours after we assess your slab and confirm the system spec.

Do you service every part of Kanata?

Yes. We cover Kanata Lakes, Beaverbrook, Bridlewood, Morgan's Grant, and the rest of Kanata. Same pricing across the NCR, no travel surcharge.

What makes commercial kitchen epoxy flooring different in Kanata?

Newer-build slabs across Kanata Lakes and Bridlewood are often under five years old. The concrete has barely finished curing, which changes how epoxy bonds and demands proper moisture verification before any base coat. That is why every Kanata job starts with a diagnostic on the slab before we spec the system.

How long does commercial kitchen epoxy flooring take in Kanata?

Most residential Kanata projects finish in one to two days depending on square footage and prep. Commercial jobs are scheduled around your operating hours or after-hours if needed.

## Need commercial kitchen epoxy flooring in Kanata?

Call or request a written quote. We respond within 24 hours.

(613) 231 8659

[tel:+16132318659 →](tel:+16132318659)

 

Request Quote

[/contact/ →](/contact/)