# Industrial Epoxy Flooring & Chemical-Resistant Coatings in Kanata, ON | Manufacturing Floor Specialists

> Industrial Epoxy Flooring in Kanata, ON. Heavy-build industrial epoxy for NCR manufacturing plants, distribution warehouses, food processing facilities, ch

URL: https://ottawaepoxyflooring.ca/industrial-epoxy-flooring/kanata/

KANATA · CITY OF OTTAWA

# Industrial Epoxy Flooring & Chemical-Resistant Coatings in Kanata, ON

Kanata garages face the same freeze-thaw hit as the rest of the NCR, but the newer slabs mean moisture testing is often the deciding factor between a five-year and a fifteen-year system.

Call (613) 231 8659

[tel:+16132318659 →](tel:+16132318659)

 

Request a Quote

[/contact/ →](/contact/)

✓ Licensed and insured ✓ NCR-wide service ✓ Written quote in 24 hours

Kanata is dominated by 2000s-and-later detached homes with attached two-car garages, alongside the Kanata North tech-corridor commercial parks. Industrial Epoxy Flooring in Kanata is what we do every week, and the substrate variation across this area is what makes the diagnostic-first approach non-negotiable.

## Industrial Epoxy Flooring in Kanata: local know-how

Newer-build slabs across Kanata Lakes and Bridlewood are often under five years old. The concrete has barely finished curing, which changes how epoxy bonds and demands proper moisture verification before any base coat. In practice that means our Kanata work starts with an ASTM F2170 moisture test and a mechanical grind to CSP 3, then a 100 percent solids base tied to a polyaspartic topcoat. Utility coordination when needed is with Hydro Ottawa.

## What is included

-   80 to 100 mil high-build systems for Class 1 to 3 forklift traffic
-   CSP 3 diamond grinding or 1 to 3 mm shot blasting on every project
-   CFIA-compliant seamless systems for food processing floors
-   TSSA secondary containment for fuel and chemical storage
-   ANSI/ESD S20.20 conductive floors for electronics manufacturing
-   Urethane cement for hot washdown and alkaline cleaning zones
-   WSIB-certified, $2M liability, full compliance documentation

## Published pricing for industrial epoxy flooring in Kanata

Written quote within 24 hours after slab assessment. Local rate published for transparency, most Ottawa contractors do not disclose.

| System | Price Range (CAD) | Notes |
| --- | --- | --- |
| Industrial Epoxy Flooring | $3 to $18 per sq ft | Loading spec, chemical resistance rating, and compliance documentation drive the final number. |
| Chemical-Resistant Coatings upgrade | Add 15 to 25 percent | Faster cure, longer lifespan, or upgraded finish depending on scope. |
| Emergency / same-day | Quoted on site | Available across the NCR when the scope allows. |

Source: Ottawa Epoxy Flooring published rate card, 2026.

## Serving every part of Kanata

We cover Kanata Lakes, Beaverbrook, Bridlewood, Morgan's Grant, Katimavik, Glen Cairn, and the rest of Kanata. Same pricing across the NCR, no travel surcharge.

## Other epoxy services in Kanata

-   Automotive Service Bay Epoxy Flooring in Kanata
    
    [/automotive-service-epoxy/kanata/ →](/automotive-service-epoxy/kanata/)
    
-   Basement Epoxy Flooring in Kanata
    
    [/basement-epoxy-flooring/kanata/ →](/basement-epoxy-flooring/kanata/)
    
-   Commercial Epoxy Flooring in Kanata
    
    [/commercial-epoxy-flooring/kanata/ →](/commercial-epoxy-flooring/kanata/)
    
-   Commercial & Industrial Epoxy Flooring in Kanata
    
    [/commercial-industrial-epoxy/kanata/ →](/commercial-industrial-epoxy/kanata/)
    
-   Commercial Kitchen Epoxy Flooring in Kanata
    
    [/commercial-kitchen-epoxy/kanata/ →](/commercial-kitchen-epoxy/kanata/)
    
-   Concrete Polishing in Kanata
    
    [/concrete-polishing/kanata/ →](/concrete-polishing/kanata/)
    

## Frequently asked questions

How much does industrial epoxy flooring cost in Kanata?

Industrial Epoxy Flooring in Kanata typically runs $3 to $18 per sq ft. Written quote within 24 hours after we assess your slab and confirm the system spec.

Do you service every part of Kanata?

Yes. We cover Kanata Lakes, Beaverbrook, Bridlewood, Morgan's Grant, and the rest of Kanata. Same pricing across the NCR, no travel surcharge.

What makes industrial epoxy flooring different in Kanata?

Newer-build slabs across Kanata Lakes and Bridlewood are often under five years old. The concrete has barely finished curing, which changes how epoxy bonds and demands proper moisture verification before any base coat. That is why every Kanata job starts with a diagnostic on the slab before we spec the system.

How long does industrial epoxy flooring take in Kanata?

Most residential Kanata projects finish in one to two days depending on square footage and prep. Commercial jobs are scheduled around your operating hours or after-hours if needed.

## Need industrial epoxy flooring in Kanata?

Call or request a written quote. We respond within 24 hours.

(613) 231 8659

[tel:+16132318659 →](tel:+16132318659)

 

Request Quote

[/contact/ →](/contact/)